Manao

Type: Vinyl Tile (LVT & SPC)

Overall Dimensions: 6x36, 6x48, 7x48, 9x48, 12x24, 18x36

Origin: Vietnam

Edge Profile: Microbevelled Edge (Wear Layer >12MIL), Square Edge (Wear Layer <12MIL)

Backing Type: IXPE (SPC), Vinyl (LVT)

Overall Thickness: 2MM, 2.5MM, 3MM, 5MM*
SPC: 4.2mm to 6mm | LVT: 2mm to 3mm 
* Overall Dimensions, Thickness, and Wear Layer options are customizable for volume-driven projects.Contact your Architessa rep for specification needs.

Wear Layer: 8MIL, 12MIL, 20MIL, 28MIL

Surface Texture: Embossed

Traffic Rating: Residential (2MM, 2.5MM); Commercial (3MM, 5MM)

Smoke Density: Pass

Fire Resistance: BFL-S1

Wear Protective Thickness: 
0.5mm - 0.7mm - Residential (25 years), Commercial (10 years)
0.3mm - 0.4mm - Residential (20 years), Commercial (5 years)
0.2mm - Residential (5 years), Commercial (3 years)

Product Warranty: 
Architessa Manao flooring warrants that SPC flooring products will be free from manufacturing defects for a period of time, consistent with the relevant warranty period, from the date of product purchase. 

SPC flooring products are waterproof and will not be damaged in the structure when exposed at normal temperature levels.

Architessa ensures that the installed product will not wear protective film during normal use as follows. Wear loss is defined herein as the wear layer that has been attenuated, worn or relatively damaged until the printing film layer is damaged, altered or otherwise affected under normal conditions of use. 

Architessa reserves the right to inspect any floor considered to be defective by the customer. Depending on the circumstances, Architessa will appoint a representative of the company and / or an independent inspector to conduct the inspection. This warranty covers only products that are properly installed and used, in accordance with Architessa's installation instructions with the recommended tools to use, to perform installation in Architessa approved spaces. This warranty is non-transferable and applies only to the original purchaser. Architessa has final judgment and may deny a claim in certain cases. The amendment and supplement of annual warranty will be considered in accordance with Architessa's regulations. A manufacturing defect must be reported within 30 days of the first day of receiving the goods. Architessa reserves the right to replace the floor in a way that is appropriate to Architessa's wishes in the case that Architessa and the buyer cannot reach agreement on the cost or replacement method. Fading, reducing gloss over time is considered normal and is not covered by the terms of the warranty.